View AS2522B-03_8056249.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

austriamicrosystems ag is now ams ag the technical content of this austriamicrosystems datasheet is still valid. contact information: headquarters: ams ag tobelbaderstrasse 30 8141 unterpremstaetten, austria tel: +43 (0) 3136 500 0 e - mail: ams_sales @ams.com please visit our website at www.ams.com
revision 3.4 page 1 of 19 austria micro systems key features - line/speech circuit, dtmf dialer, fsk transmitter and tone ringer on a 32-pin cmos-ic - enhanced voice switching - background noise monitoring - dtmf tone generator - fsk transmitter v.23, bell202, v.21, bell 103 - ringer tone programmable - tx- and rx-gain programmable - digital volume control of rx signals - dc characteristic programmable - dual softclipping in handset mode - tx-softclipping in handsfree mode - common monitor amplifier for loudhearing, handsfree and ringing - supply voltage generation for external circuitry - automatic line loss compensation (llc) - real and complex impedance selectable by external components - side tone adaptation selectable by external components - unique emc performance - operating range from 15ma to 100ma (down to 5ma with reduced performance) - few external components general description as2522 is a cmos integrated circuit that incorporates dc and ac line adaptation (dc-mask and synthesized ac- impedance of 100 0? ) as well as a speech circuit with softclipping, line loss compensation and rx-volume control for handset and handsfree operation. it shall act as an a/b- line powered device, which is controlled by a cpu via a serial interface. furthermore the as2522 incorporates a dtmf, fsk transmitter, single tone and ringer tone generator. as2522 allows to use an off-the-shelf microprocessor without special blocks and functions for telephone applications. dtmf, fsk transmitter, single tone and ringer tone generator can be controlled via the serial interface as well as the gain settings in handset and handsfree mode. applications enhanced handsfree feature phones with callerid and extended displays. package available in 32-pin tqfp block diagram telephone line interface and speakerphone circuit as2522b data sheet ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 2 of 19 pin description pin # symbol function 13 ls l ine current s ense input analog input for sensing the line current 10 li l ine i nput analog input used for power extraction and line current sensing 11 ri r eceive i nput analog input for ac-separated receive signal 7stb s ide t one b alance input analog input for side tone cancellation network 8cs c urrent s hunt control output n-channel open drain output to control the external high power shunt transistor for synthesizing ac- and dc-impedance, modulation of line voltage and shorting the line during make periods of pulse dialing 14 ci c omplex i mpedance input analog input pin for the capacitor to program a complex impedance 12 ss s upply s ource control output n-channel open drain output to control the external high power source transistor for supplying (vpp) the loudspeaker amplifier in off-hook loudspeaking/handsfree mode 9 vss v oltage s ource s ource negative analog power supply 18 vdd v oltage d rain d rain positive analog power supply 19 agnd a nalog g round special ground for the internal amplifiers 6m1 m icrophone input 1 differential input for the handset microphone (electret) 4m2 m icrophone input 2 differential input for the handset microphone (electret) 5m3 m icrophone input 3 differential input for the handsfree microphone (electret) 3m4 m icrophone input 4 differential input for the handsfree microphone (electret) 17 ro r eceive o utput to h andset output for driving a dynamic earpiece with an impedance from 150 ? to 300 ? 31 osc o scillator input input for ceramic resonator 3.58mhz. ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 3 of 19 pin # symbol function 22 vpp loudspeaker power supply high power supply for the output driver stage 21 cm c onverter m ake output this is an output for controlling the external switching converter. during ringing it converts the ring signal into a 4v supply voltage 27 xcs c hip s elect chip select input of the serial interface. internal pull-up resistor ( 100kohm ) 29 di d ata i nput data input of the serial interface. internal pull-up resistor ( 100kohm ) 30 clk cl oc k clock input of the serial interface. internal pull-up resistor ( 100kohm ) 28 do d ata o utput data output of the serial interface. if xcs=1 do is in hi-z state 24 23 lo1 lo2 l oudspeaker o utput 1 and 2 output pins for a 50 ? loudspeaker 1 ft1 analog input pin for connecting a capacitor for offset cancellation. 2 ft2 analog input pin for connecting a capacitor for offset cancellation. 20 cbn analog input pin for connecting a capacitor for background noise monitoring. 15 reci analog input for the handsfree receive path. should be connected to ro via coupling capacitor. 16 recv analog input for receive voice switching path. 25 vssa power supply pin for ls1-ls2 output amplifier. 32 vssd v oltage s ource s ource d igital negative digital power supply 26 vddd v oltage d rain d rain d igital positive digital power supply ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 4 of 19 detailed block diagram ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 5 of 19 functional description dc conditions the normal operating mode is from 15ma to 100ma. an operating mode with reduced performance is from 5ma to 15ma. in the line hold range from 0ma to 5ma the device is in a power down mode. the dc characteristic is determined by the voltage at li- pin and a 30 ? resistor between li- and ls-pin. it can be calculated by the following equation: v ls = v li + i line * 30? . v li can be programmed to be 3.5v or 4.5v. 2/4 wire conversion as2522 has a built-in dual wheatstone bridge with one common ground. this provides a maximum of independence of ac-impedance and side tone from each other. one can adapt side tone without changing the ac- impedance. ac-impedance the ac-impedance of as2522 is set to t.m. 1000 ? . with the external capacitor at ci-pin it can be programmed complex. with an external resistor of approx. 1.5k ? connected to the ls-pin it can be programmed to 600 ? . side tone a good side tone cancellation can be achieved by using the following equation: z bal /z line = 10 transmit path the gain of the m1/m2 ls is set to +37db. this gain can be changed by programming from +30db to +45db in 1db steps (register txgain ). the input is differential with an impedance of 10k ? . the soft clip circuit limits the output voltage at ls to 2v p. there is llc for this path. the gain of the m3/m4 ls is set to +46db. this gain can be changed by programming from +39db to +54db in 1db steps. the input is differential with an impedance of 10k ? . the soft clip circuit limits the output voltage at ls to 2v p . there is no llc for this path. receive path the gain of the ls ro receive path is set to +1db. this gain can be changed by programming from -6db to +9db in 1db steps (register rxgain ). the receive input is the differential signal of ri and stb. the soft clip circuit limits the output voltage at ro to 1v p. it prevents harsh distortion and acoustic shock. there is llc for this path. the gain of the ls lo1/lo2 receive path is set to +29db. this gain can be changed by programming from +22db to -37db in 1db steps. the user can also change the gain via register vol (see section "handsfree"). the receive input is the differential signal of ri and stb. the soft clip circuit limits the output voltage at lo1 of lo2 to 1v p. it prevents harsh distortion and acoustic shock. there is optional llc for this path. line loss compensation the line loss compensation is programmable (register 0x0c ). when it is activated, the transmit and receive gains for both i/o?s are decreased by 6db at line currents from 20ma to 50ma or from 45ma to 75ma. handsfree the handsfree function allows voice communication without using the handset (full 2-way speaker phone). two voice controlled attenuators prevent acoustic coupling between the loudspeaker and the microphone. the voice switching circuit has three states, namely idle, transmit or receive. in receive mode the attenuation of the receive path and the transmit path can be controlled by register vol between 0db and -20db. the following table shows how voice switching is controlled ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 6 of 19 tx_atten backgnd noise monitor voice switching speech rx voice switching circuit ro reci +3db +14db voice switching speech gmax = -4db ? +16db (vol) gmin = -33db offset comp compress peak detector cmicoffset +23db cbckgnd offset comp compress peak detector ctxoffset offset comp compress peak detector line gmax = +9db gmin = -21db ? -40db (vol) +12db recv ft2 ft1 cbn +8db speech mode rx-gain tx-gain remark rx > tx_atten x receive 0db to -20db -50db to -30db adjustable with vol-setting tx_atten > rx no idle -25 -25 middle position tx_atten > rx yes transmit -50db 0db independent of vol-setting -50db -25db 0db tx-mode rx-mode idle-mode vol min vol default vol max tx-gain rx-gain -10db -20db -40db -30db ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 7 of 19 serial interface registers the settings of the as2522 are stored in 16 registers. each register has 4 bit data width. writing data into the as2522 also causes the sending of the as2522 status information on pin d0. this information consists of the dc-current information (from the line loss compensation circuit) and the status of the power-on reset circuit to test if as2522 has already powered up. d7 d6 d5 d4 d3 d2 d1 d0 llc5 llc4 llc3 llc2 llc1 llc0 xpor por power on reset information in statusbits d1 and d0 d1 d0 00 0 1 as2522 is in por state 1 0 as2522 is active 11 dc-current information in statusbits d7 ? d2 d[7:2] llc-bit lo llc-bit hi 000000 <20ma <45ma 000001 20-26ma 45-51ma 000011 26-32ma 51-57ma 000111 32-38ma 57-63ma 001111 38-44ma 63-69ma 011111 44-50ma 69-75ma 111111 >50ma >75ma ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 8 of 19 timing the data format for writing to a register has the following form: a3 a2 a1 a0 d3 d2 d1 d0 d7 d6 d5 d4 d3 d2 d1 d0 xcs cl k di do note: the pins xcs,clk,di have internal pull-up resistors. parameter symbol min typ max clk pulse width high t6 100ns clk pulse width low t5 100ns xcs to first falling clk- edge setup time t1 50ns clk to dout delay t2 50ns din to clk setup time t3 50ns din to clk hold time t4 50ns t 1 xcs cl k din dout t 2 t 3 t 4 t 5 t 6 ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 9 of 19 serial interface registers the following table shows the content of the 16 control registers. for a detailed description of the commands see application note an522. control registers as2522a, as2522b default value after reset aaaadddd 32103210 0000nop no operation. write to this location to get as2522-satus information without alterin g an y other settin g . na 0001dtmfpair frequency select depending on tone generator mode 0000 dtmf-generator mode: single tone mode as2522b only and fsk=1 (addr 12): f4, c1 f3, c0 f2, r1 f0, r0 high group low-group data c1 c0 fhigh r1 r0 flow f[3:0] frequency 0 0 1209hz 0 0 697hz 0000 0hz 0 1 1336hz 0 1 770hz 0001 800hz (ring) 1 0 1477hz 1 0 852hz 0010 1067hz (ring) 1 1 1633hz 1 1 941hz 0011 1333hz (ring) 0100 1300hz (v.23) 0101 2100hz (v.23) 0110 1200hz (bell 202) 0111 2200hz (bell 202) 1000 980hz (v.21) 1001 1180hz (v.21) 1010 1070hz (bell 103) 1011 1270hz (bell 103) 1100 1650hz (v.21) 1101 1850hz (v.21) 1110 2025hz (bell 103) 1111 2225hz (bell 103) 0010dtmflevel dtmf-level 13 steps, 1db stepsize 1100 data dtmf-level low group at pin ls 0x0 -16dbm :: 0xc -4dbm 0011 xxxx dtmf-settings 0101 tone preemph ct1 ct0 tone : dtmf-signal path 0...off, 1...on preemph: dtmf-preempahsis 0...2.2db, 1?3.2db ct1 ct0 : @ro @lo1/lo2 0 0 -36db -15db dtmf-confidence level 0 1 -30db -9db rel. to pin ls 1 0 -24db -3db 1 1 -18db +3db 0100 xxxx single tone frequencies if fsk=0 (addr. 12) and ring/beep volume [4] 0000 frequ1 frequ0 v1 v0 frequ1 frequ0 v1 v0: ring volume 0 0 800hz 0 0 -17.5db 0 1 1067hz 0 1 -11.5db 1 0 1333hz 1 0 -5.5db 111333hz 11 0db 0101 xxxx tone generator mode, single tone path 0000 burs burl m1 m0 burs: analog tone at ro 0...off, 1...on burl: analog tone at lo1/lo2 0...off, 1...on m1 m0: tone generator mode select 0 0 tone generator off 0 1 dtmf generator mode 1 0 single tone analog mode 1 1 single tone digital mode ( ring ) 0110 xxxx softclip-settings, noise monitoring 0000 ring bnon soft-rx soft-tx ring : ring-path 0...off, 1...on bnon: noise monitor 0...off, 1...on softrx: softclip rx 0...off, 1...on softtx: softclip tx 0...off, 1...on 0111 xxxx dc/dc-converter on/off,mask 0000 ldbr ldbl mask dc/dc ldbr: digital tone at ro 0...off, 1...on ldbl: digital tone at lo1/lo2 0...off, 1...on mask: mask function 0...off, 1...on dc/dc: dc/dc-converter 0...off, 1...on address data ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 10 of 19 control registers as2522a, as2522b default value after reset aaaadddd 32103210 1 0 0 0 16 gains handsfree receive endgain 0111 data rxgain txgain 0x0 -20db -30db min. receive volume :: 0xf 0db -50db max. receive volume 1 0 0 1 x x x x handsfree switching characteristic 1000 off1 off0 hfs1 hfs0 off1 off0 : bgn-offset 0 0 120mv 0 1 180mv 1 0 240mv 1 1 300mv hfs1 hfs0: speed of voice switching 0 0 max speed 01 10 1 1 min speed 1 0 1 0 16 gains transmit gain [16], 16 steps, 1db stepsize 0111 data hs-mode hf-mode 0x0 30db 39db ::: 0xf 45db 54db 1 0 1 1 16 gains receive gain [16], 16 steps, 1db stepsize 0111 data hs-mode hf-mode 0x0 -6db 22db ::: 0xf +9db 37db 1 1 0 0 x x x x fsk-mode, llc[2], li-voltage 0111 fsk liv llc1 llc0 as2522b: fsk: frequency select in single tone mode as2522b only fsk: 0 single tone frequencies are read from addr. 4: frequ1, frequ0 1 single tone frequencies are read from addr. 1: f4,f3,f2,f1 as2522a fsk: for factory test only ! liv: voltage at pin li 0...3.5v, 1...4.5v llc1 llc0: line loss compensation setting 0 0 20ma-50ma 0 1 no line loss compensation 1 0 45-75ma 1 1 no line loss compensation 1 1 0 1 x x x x mute, lh, hf, hook switch 0000 mute lh hf his mute: mute transmit 0...off, 1...on hishflh 0xx onhook 1 0 0 off hook, handset mode 1 1 0 off hook, handfree mode 1 1 1 off hook, loudhearing mode 1110xxxx krat5,test3,test2,test1: for factory test only ! 0000 krat5 test3 test2 test1 1111xxxx reset to defaults na address data ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 11 of 19 electrical characteristics electrical characteristics are measured with the test circuit application. typical mean values will not be tested. absolute maximum ratings positive supply voltage -0.3v <= v dd <= 7v input current +/- 25ma input voltage (ls) -0.3v <= v in <= 12v input voltage (li, cs) -0.3v <= v in <= 8v input voltage (stb, ri) -2v <= v in <= v dd +0.3v digital input voltage -0.3v <= v in <= v dd +0.3v electrostatic discharge (hbm 1.5k ? -100pf) +/- 1000v storage temperature -65c to +125c recommended operating conditions supply voltage (generated internally) 3v <= v dd <= 5v operating temperature -25c to +70c dc characteristics i line =15ma w/o operation of any additional external circuitry, unless other specified symbol parameter conditions min type max units test i dds operating current speech mode 3 6 ma y i ddh operating current handsfree mode 7 10 ma y v li line voltage livolt=0 line voltage livolt=1 15ma<=iline<=100ma 3.2 4.2 3.5 4.5 3.8 4.8 v v y y i ol output current, sink cs,ss vol=0.4v 1 ma n ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 12 of 19 transmit characteristics i line =15ma f=800hz, default settings unless other specified symbol parameter conditions min type max units test a m1/2tx transmit gain m1/m2 ls z ac(syn)= 1000 ? 35 +36.5 38 db y a m3/4tx transmit gain m3/m4 ls z ac(syn) =1000 ? 43 +45.0 47 db y ? a tx variation with frequency f = 500hz ? 3.4khz 0.8 db n a vrm12 control range m1/m2 ls 16 steps -7/+8 dbr n a vrm34 control range m2/m4 ls 16 steps -7/+8 dbr n thd distortion v ls =0.25vrms 2%y v agc1 soft clip level m1/m2 ls at ls 2vpn v agc2 soft clip level m3/m4 ls at ls 2vpn a sco soft clip overdrive m1/m2 - m3/m4 20 db n t attack attack time 70 us/6db n t decay decay time 100 ms/6db n z in-m1/2 input impedance m1/m2 10 k ? n z in-m3/4 input impedance m3/m4 10 k ? n v inmax input voltage range m1/2 - m3/4 differential 1 vp n v no noise output voltage ls t amp =25c handset mode gain = 36.5db -72 dbmp y a mute mute attenuation mute activated 60 db y ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 13 of 19 receive characteristics i line =15ma f=800hz, default settings unless other specified symbol parameter conditions min type max units test a ro receive gain ls ro z ac(syn) =1000 ? vol default -2 -0.5 1 db y a lo12 receive gain ls lo1/lo2 z ac(syn) =1000 ? vol maximum +28 +29.0 +31 db y ? a rx variation with frequency f=500hz to 3.4khz 0.8 db n a vrro control range ls ro 16 steps -7/+8 dbr n a vrls control range ls ls1/ls2 16 steps -7/+8 dbr n thd ls distortion ls1/ls2 v ls =0.25vrms 5%y thd ro distortion ro v ls =0.25vrms 2%y v ufc unwanted freq. cmp. f = 200 ? 20khz -60 dbm y v agcro soft clip level ro 1vpn v agcls soft clip level ls1/2 2vpn a scls soft clip overdrive ls1/2 10 db n t attack attack time 70 us/6db n t decay decay time 100 ms/6db n v no noise output voltage ro t amp =25c gain = 3db -72 dbmp y z in-ri v inmax input imp. ri input voltage range ri 8 2 k ? vp n z in-stb v inmax input imp. stb input volt. range stb 80 2 k ? vp n st side tone v ri <=0.25vrms 26 db y rl ? z ac/c return loss temp. variation z ac(syn) =1000 ? 18 0.5 db ? /c y ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 14 of 19 dtmf characteristics i line =15ma w/o operation of any additional external circuitry, unless other specified, default settings symbol parameter conditions min type max units test v mflow tone level low group at ls default -7 -6 -5 dbm y mf range dtmf level range low group at ls 13 steps prg. in service mode -18/-6 dbm n ? v l-h preemphasis l-h preemphasis=1 2.7 3.2 3.7 db y ufc unwanted frequency components 300 hz - 4.3khz 4.3khz - 7khz 7khz - 10khz 10khz - 14khz 14khz - 28.5khz 28.5khz - 40khz -40 -46 -52 -58 -70 -80 dbm dbm dbm dbm dbm dbm y y y y y y ? f frequency deviation 1.2 % y v ct-h comfort tone handset rel to ls programmable in service mode -36 -30 -24 -18 dbr dbr dbr dbr n n n n v ct-l comfort tone loudspeaker rel to ls programmable in service mode -15 -9 -3 +3 dbr dbr dbr dbr n n n n ringer symbol parameter conditions min type max units test f0 f1 f2 f3 f4 f5 f6 f7 f8 f9 f10 f11 f12 f13 f14 f15 frequency 0 frequency 1 frequency 2 frequency 3 frequency 4 frequency 5 frequency 6 frequency 7 frequency 8 frequency 9 frequency 10 frequency 11 frequency 12 frequency 13 frequency 14 frequency 15 770 1025 1280 0 800 1067 1333 1300 2100 1200 2200 980 1180 1070 1270 1650 1850 2025 2225 830 1110 1385 hz hz hz hz hz hz hz hz hz hz hz hz hz hz hz hz n y y y n n n n n n n n n n n n ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 15 of 19 miscellaneous symbol parameter conditions min type max units test v paro pacifier level at ro rl = 150 ohm 30 mv pp n v pals pacifier level at ls1/2 rl = 50 ohm 100 mv pp n test circuit 1uf 15nf 10k 5v1 10uf iline 15nf 50 100nf 1uf bc327 15nf 15nf 100uf 10uf vac 10uf 22uf 3.58mhz resonator 470uf 600 bc327 10k 1uf 10v 150 100nf as2522a 13 11 10 7 8 32 9 12 22 25 21 18 26 19 1 2 20 31 30 29 28 27 24 23 16 15 17 4 6 3 5 14 ls ri li stb cs vssd vss ss vpp vssa cm vdd vddd agnd ft1 ft2 cbn osc clk di do xcs lo1 lo2 recv reci ro m2 m1 m4 m3 ci 6k 100uf 30 300 ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 16 of 19 typical application ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 17 of 19 bonding diagram 32 lead 7x7mm tqfp dimensions ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 18 of 19 packaging 32-pin plastic tqfp (suffix q) for exact mechanical package dimensions please see austriamicrosystems ag packaging information. pin-out, marking yywwaaa as2522 x ft1 1 ft2 2 m4 3 m2 4 m3 5 m1 6 stb 7 cs 8 vss 9 li 10 ri 11 ss 12 ls 13 ci 14 reci 15 recv 16 24 lo1 23 lo2 22 vpp 21 cm 20 cbn 19 agnd 18 vdd 17 ro 32 vssd 31 osc 30 clk 29 di 28 do 27 xcs 26 vddd 25 vssa yy year of production ww calendar week of production aaa austriamicrosystems ag assembly id x revision ordering information number package description as2522b q tqfp plastic thin quad flat package ? 32 leads (suffix t) as2522b f dof dice-on-foil devices sold by austriamicrosystems ag are covered by the warranty and patent identification provisions appearing in its term of sale. austriamicrosystems ag makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. austriamicrosystems ag reserves the right to change specifications and prices at any time and without notice. therefore, prior to designing this product into a system, it is necessary to check with austriamicrosystems ag for current information. this product is intended for use in normal commercial applications. applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by austriamicrosystems ag for each application. copyright copyright ? 1997-2002, austriamicrosystems ag, schloss premstaetten, 8141 unterpremstaetten, austria-europe. trademarks registered ?. all rights reserved. the material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. the information furnished here by austriamicrosystems ag is believed to be correct and accurate. however, austriamicrosystems ag shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. no obligation or liability to recipient or any third party shall arise or flow out of austriamicrosystems ag rendering of technical or other services. ams ag technical content still valid
data sheet as2522b austria micro systems revision 3.4 page 19 of 19 contact headquarters austriamicrosystems ag communications business unit a 8141 schloss premst?tten, austria t. +43 (0) 3136 500 0 f. +43 (0) 3136 525 01 www.austriamicrosystems.com sales offices germany austriamicrosystems germany gmbh tegernseer landstrasse 85 d-81539 mnchen, germany phone: +49/89/693643-0 fax: +49/89/693643-66 france austriamicrosystems france s.a.r.l. 124, avenue de paris f-94300 vincennes, france phone: +33/1/43 74 00 90 fax: +33/1/43 74 20 98 italy austriamicrosystems italy s.r.l. via leone tolstoi, 64 i-20146 milano, italy phone: +39/0242/36713 fax: +39/0242/290889 switzerland austriamicrosystems switzerland ag rietstrasse 4 ch-8640 rapperswil, switzerland phone: +41/55/220 9000 fax: +41/55/220 9001 usa (west) austriamicrosystems usa, inc. suite 116, 4030 moorpark ave, san jose, ca 95117, usa phone: +1/408/345 1790 fax: +1/408/345 1795 usa (east) austriamicrosystems usa, inc. suite 400, 8601 six forks road raleigh, nc 27615, usa phone: +1/919/676 5292 fax: +1/919/676 5305 united kingdom austriamicrosystems uk, ltd. coliseum business centre, watchmoor park camberley, surrey, gu15 3yl, uk phone: +44/1276/23 3 99 fax: +44/1276/29 3 53 japan austriamicrosystems ag shin yokohama daini, center bldg. 10f 3-19-5, shin yokohama kohoku-ku, yokohama 222-0033, japan phone: +81/45/474 0962 fax: +81/45/472 9845 distributors & representatives austriamicrosystems ag is represented by distributors in the following countries. please contact your nearest regional sales office for the distributor address: spain, israel, korea, hong-kong, taiwan, malaysia, singapore, india, brazil application support please contact your local sales office or your distributor. ams ag technical content still valid

▲Up To Search▲

Price & Availability of AS2522B-03

	To Download AS2522B-03 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .